Fits 1967-1974 Camaro,1965-1974 Chevy Full Size, 1964-1974 Chevelle/El Camino, 1970-1974 Monte Carlo, 1968-1974 Nova, 283-400ci Small Block Chevy, 1.625" Primary Tube x 3.00" O.D Collector Size
The Darkside coating also provides improved thermal resistance as compared to traditional silver ceramic (1700° F vs. 1300° F) making it highly recommended for supercharged or nitrous applications as well as for reduced under-hood temperatures.
This header is designed to fit multiple vehicle applications. As such, the collectors exit at two different heights in order to accommodate them all. If you are looking for a header with more available ground clearance, please check out part number 2466HKR or the Super Competition header designed specifically for your vehicle. Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts. This header will not fit with close ratio steering box or rack conversions. Lowered ride height may result in insufficient ground clearance Check (2466HKR or Super Competition header for your vehicle). This header was designed around the factory small block engine with factory heads. Raised port heads, D-port heads or non-stock plug locations may cause gasket leaks and header fitment issues that require modification to fit. This header will not work with angle plug heads.
Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
The Darkside coating also provides improved thermal resistance as compared to traditional silver ceramic (1700° F vs. 1300° F) making it highly recommended for supercharged or nitrous applications as well as for reduced under-hood temperatures.
- Provides unique styling enhancement that is equally pleasing in either a nostalgic retro application or a modern hi-tech build. As this coating is not burnished after its application, the surface appearance is more consistent
- Increased corrosion protection ensures long service life and maintained appearance of investment
- High-efficiency thermal properties limit heat migration through the header assembly, which in turn lowers under-hood temperatures for more performance
- Provides a higher heat tolerance threshold than available from silver ceramics (ours or any of our competitor’s) and is therefore recommended for any applications producing elevated exhaust gas temperatures
- Formulated to withstand extreme temperatures (stability rating is 1700° F vs 1300º F on silver ceramic) without discoloration and maintains excellent adhesion even after repeated thermal cycling
- Works with factory power steering and power brakes
Information:
NOTE: Installation requires air conditioning bracket Part #10925HKR left side or Part #10926HKRright side.This header is designed to fit multiple vehicle applications. As such, the collectors exit at two different heights in order to accommodate them all. If you are looking for a header with more available ground clearance, please check out part number 2466HKR or the Super Competition header designed specifically for your vehicle. Factory style motor mounts must be used to ensure proper engine locations and header fit. Aftermarket solid and urethane mounts, worn or incorrect mounts will cause header fitment issues. If you have floor pan clearance issues on the pass side header, check your sub-frame mounts. This header will not fit with close ratio steering box or rack conversions. Lowered ride height may result in insufficient ground clearance Check (2466HKR or Super Competition header for your vehicle). This header was designed around the factory small block engine with factory heads. Raised port heads, D-port heads or non-stock plug locations may cause gasket leaks and header fitment issues that require modification to fit. This header will not work with angle plug heads.
Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Application Summary:
| Year | Make/Model |
|---|---|
| 1965-1974 | Chevrolet Bel Air |
| 1965-1972 | Chevrolet Biscayne |
| 1969-1972 | Chevrolet Brookwood |
| 1967-1974 | Chevrolet Camaro |
| 1966-1974 | Chevrolet Caprice |
| 1964-1973 | Chevrolet Chevelle |
| 1968 | Chevrolet Chevy II |
| 1964-1974 | Chevrolet El Camino |
| 1969-1970 | Chevrolet Estate |
| 1965-1974 | Chevrolet Impala |
| 1969-1972 | Chevrolet Kingswood |
| 1973-1974 | Chevrolet Laguna |
| 1967 | Chevrolet Malibu |
| 1973-1974 | Chevrolet Malibu |
| 1970-1974 | Chevrolet Monte Carlo |
| 1969-1974 | Chevrolet Nova |
| 1969-1972 | Chevrolet Townsman |
| 1971-1974 | GMC Sprint |
| Attributes | |
| ASIN | B002IEKNVC |
| Application | Automotive |
| Bolt size | 3/8-16 x 3/4 |
| Brand | Hooker, Hooker |
| CARB (California) Compliant | No |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category | Exhaust |
| Coated Finish | Black Ceramic |
| Coating/Finish | Black Ceramic |
| Collector Diameter | 3.000 in., 3.00 inch |
| Collector Diameter (in.) | 3.00 |
| Collector Tube Size | 2.500 in. |
| Collector Tube Size (in.) | 2.5 |
| Country of Origin (Primary) | CN |
| Emission Code | 4, 4, Off Road |
| Engine | Chevrolet Small Block Gen I, Chevrolet Small Block Gen I |
| Engine Make/Size | Chevy Small Block |
| Finish | Black Ceramic |
| GTIN | 00090127663851 |
| Harmonized Tariff Code (Schedule B) | 8708925000 |
| Hazardous Material Code | N |
| Head Style | Long-Tube |
| Header Finish | Black Ceramic, Black Ceramic |
| Header Flange Thickness | 5/16 inch, 5/16 inch |
| Header Flange Thickness (in) | 5/16 inch |
| Header Style | Long Tube, Long Tube |
| Life Cycle Status Code | Available to Order |
| Material | Mild Steel |
| NAFTA Preference Criterion Code | B |
| Part Type | Exhaust Header |
| Port Shape | Same As Port/Can Be Matched |
| Primary Tube Dia. | 1-5/8 inch, 1-5/8 inch |
| Primary Tube Diameter | 1.625 in. |
| Product Type | Header, Headers |
| SDR Required Flag | N |
| Sale Category | Exhaust |
| Sub Category | Exhaust Manifolds |
| Tube Diameter | 1.625 in. |
| Tube Direction | Down Swept |
| Tube Material | Mild Steel, Mild Steel |
| Tube Size | 1.625 |
| Warning | California Proposition 65, California Proposition 65 |
| Warranty Time | 90 |
Hooker 2451-3HKR Hooker Competition Long Tube Headers - Black Ceramic Coated
Product Information
- Brand: Hooker Headers
- Product Number: 2451-3HKR