HushMat Ultra Thermal Insulating and Deadening Material Bulk Kit contains thirty 12 in. x 23 in. sheets of Silver Foil 58 Sq Ft. Reduce heat and noise with one material. Treats one small vehicle.
HushMat Bulk Kit contains 58 sq ft of the easiest to install sound deadening and thermal insulating material. There are no tools or adhesives required. Super flexible and moldable. Manufactured in the USA for three decades, rated #1 in performance.
  • Proprietary self-adhesive butyl rubber compound significantly reduces road noise and vibrations for a quieter ride.
  • Silver or Black Aluminum foil backing provides same excellent heat insulation for a cooler interior in the summer and warmer in the winter.
  • High-temperature resistance up to 550 degrees F.
  • Flexible and easy to mold to complex surfaces offers easy installation without special tools or harmful chemical surface preparation.
  • Lightweight design offers minimal impact on overall vehicle weight.
  • Moisture and corrosion resistant long lasting protection against moisture and rust, ensuring durability.
  • Manufactured in the United States of America.

Information:

Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter with one USA Made material, light weight HushMat Ultra.
Attributes
ASIN B001VKT9PK
Add-On Part None
California Proposition 65 No
Cold Flexibility Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion, Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion
Color Polymer - Black; Backing - Silver, Polymer - Black; Backing - Silver
Country of Origin (Primary) US
Emission Code Legal US
FAB Flexible and easy to mold to complex surfaces offers easy installation without special tools or harmful chemical surface preparation.
Flammability Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard, Tested per FMVSS 302, HushMat Ultra is self-extinguishing and meets all aspects of the standard
GTIN 00881101105012
Hardness 6.5 - 9.0mm ?ASTM D-5, 6.5 - 9.0mm. ASTM D-5
Harmonized Tariff Code (Schedule B) 4008210000
Hazardous Material Code N
Life Cycle Status Code Available to Order
NAFTA Preference Criterion Code B
Peel Strength Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported., Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported.
R-Value 7, 7
SDR Required Flag N
SDS Sheet Number NA
Safety HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product., HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
Shelf Life At least 6 months when stored at 40 degrees C or less, At least 6 months when stored at 40 degrees C or less
Specific Gravity 1.47 (approx. 0.47 pounds per square foot), 1.47 (approx. 0.47 pounds per square foot)
Temperature Resistance HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions., HUSHMAT ULTRA will withstand a bake of 1 hour at 240 degrees C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
Thickness 1.5mm, 1.5mm
Warranty Time 1

Write a review.

Note: HTML is not translated.
    Bad           Good

Hushmat 10501 HushMat Bulk Kit - Sound Deadening & Thermal Insulation - Total 58.1 sqft.

Product Information

  • Brand: Hushmat
  • Product Number: 10501

0 reviews  /  Write a review.